Foster supplies and installs walk-in coolers, walk-in freezers, cooler/freezer combos and glass-door beverage coolers in Sands Point, Nassau County. Boxes are built to order in Hudson, NY — about 2 hours 40 minutes away — from 26-gauge galvanized steel with foamed-in-place polyurethane insulation and no wood in any door, frame or floor. Minimum size 6×6 ft, expandable in 2-ft increments. Standard lead time 2–4 weeks. 15-year panel warranty. Call 518-671-6036.
What commercial refrigeration in Sands Point actually has to deal with
Sands Point occupies the tip of the Port Washington peninsula — a village of large properties, the Sands Point Preserve, clubs and institutional grounds, with Port Washington's restaurant and grocery strip immediately south. Commercial refrigeration here is club, estate, event and institutional rather than retail.
What we typically build for Sands Point
Event-driven kitchens want capacity for peaks and efficiency at idle, which usually means a cooler/freezer combo on a shared condensing unit rather than two independent boxes. Waterfront siting again makes marine-grade outdoor plant worth specifying.
Every Foster box is made to order rather than picked from a catalogue, so door position, swing direction, panel schedule and floor type are set to your opening — not the other way round. Floors are 3/16-inch aluminium diamond plate rated to 750 lbs per square foot, which matters if you are rolling loaded carts or pallet jacks into the box.
Getting it to Sands Point
Peninsula access is via Port Washington Boulevard with narrow village roads beyond. Deliveries are scheduled to a single set-down point with a carry-in, and outdoor plant is sited with prevailing salt wind in mind.
This is the part most quotes get wrong. We plan the delivery before we price the job, so the number you get accounts for how the panels actually reach the opening — not just what the box costs to build.
Size it before you call
Three free tools, no email required. The refrigeration load calculator runs ASHRAE heat-load math for your dimensions, product and door traffic. The cost calculator gives a 2026 installed price. The energy cost tool shows what the box will cost to run per year at New York commercial electricity rates — which is usually the number that decides between a cheap box and a good one.
Common questions
Do you deliver walk-in coolers to Sands Point?
Yes. Foster manufactures walk-in coolers and freezers at our plant at 300 Fairview Avenue, Hudson, NY 12534 and delivers and installs throughout Nassau County, including Sands Point — about 2 hours 40 minutes from the plant. Standard builds ship in two to four weeks. Call 518-671-6036 to confirm a delivery window for your address.
What does a walk-in cooler cost in Sands Point?
As of Q3 2026, an installed walk-in cooler runs roughly $115–$175 per square foot, so an 8×10 box (80 sq ft) lands near $9,000–$14,000 including the refrigeration system and installation. Freezers run $145–$225 per square foot because of thicker insulation and a larger condensing unit. Access constraints at the delivery address move the installation portion, not the box price. Use our free cost calculator for a figure with no email required.
Can you service an existing walk-in in Sands Point?
Yes, and not only Foster boxes — we service walk-in coolers, freezers and commercial refrigeration of every brand, including Norlake, Kolpak, Amerikooler and unbranded older units. Preventive maintenance is scheduled on routes, so call 518-671-6036 with your address to confirm current availability in Sands Point.
Get a walk-in quote for Sands Point, NY
Send your dimensions and temperature target and a Foster engineer replies with a price, a lead time and a delivery plan for your address — usually the same business day. Or size it yourself first with the free calculators.